REVIEW – Since everyone who reads my reviews already knows that I am remodeling a basement, I will not go into those details. Everyone also already knows that I believe in having every tool necessary for the job and as such, I have quite an extensive tool selection relevant to my DIY projects and tasks. I am now onto the section where I am building my in-house bar, and I am using this nice pine wood that I found along with screws with hex nut heads to mount the wood to the metal studs to create my rustic look concept. To do this correctly, I have to drill pilot holes and then drive in the hex screws. This is a tedious process because I normally have to use 2 drivers and switch between them going from drill bit to hex screw bit. Well, this is tedious no more. Enter the Worx Nitro 20V Brushless Switchdriver 2.0 2-in-1 Cordless Drill & Driver!!
The Worx Nitro 20V Brushless Switchdriver 2.0 2-in-1 Cordless Drill & Driver is a next-generation Switchdriver 2.0 that includes all the features of the original Switchdriver but with upgrades like a brushless motor and intelligent digital display. It features a high-efficiency brushless motor that runs 50% longer and is 25% more powerful than its predecessor, 1/4″ rotating dual chucks that let you switch between drill or driver bits faster, an intelligent digital interface, and a keypad that allows you to quickly change between 9 torque settings and a variable speed trigger.
1 x Worx Nitro 20V Brushless Switchdriver 2.0 2-in-1 Cordless Drill & Driver 1 x 2 in. Screwdriver Bit 1 x 1/8 in. Hex shank HSS Drill Bit 2 x 3/32 in. Hex shank HSS Drill Bit 1 x Belt Hook 1 x Carry Bag 1 x 2.0Ah Battery (WA3575) 1 x Quick Charger (WA3881) 1 x User Manual
Specifications Battery Capacity: 2.0Ah No-Load Speed: 0-450 / 0-1700 RPM Chuck Size: 1/4″ Dual Max Torque: 443 in-lbs. Weight: 2.71 lbs.
The Worx Switchdriver 2.0 2-in-1 is designed with 2 built-in quick release chucks, and an ergonomically designed button to allow the chucks to be switched by rotating the head. it also features the usual mid-body directional button and a torque selector with a digital display on the top. On the bottom of the handle, there is a quick release for the battery and on the battery. There is a charge level indicator touchpad.
The first test that I did was to check the charge level of the included battery, and then I charged it fully. I tested this Switchdriver on my current DIY project which is building a bar in my basement. Since I used metal studs and needed to mount the wooden face to the studs, I wanted to drill a pilot hole for each hex screw and then drive it in. Completing this task with this device was a fantastic experience and likely save me at least 50% of the time needed if I had to use two drivers. Once I set the torque level that I needed, there was enough torque, and worked amazingly well. The only issue that I encountered was that when the screw was tight, the Switchdriver kept going and initially twisted my wrist. I adjusted accordingly. The photo below shows the wooden face of the bar with a built-in fireplace that I attached to the metal studs using this tool. It is my concept of rustic, so I wanted the look and feel that the visible heads of the hex screws provide.
I have previously tested a couple of Worx tools and loved them. The Worx Nitro 20V Brushless Switchdriver 2.0 2-in-1 Cordless Drill & Driver is no exception and if I am being totally honest, while I continue to remodel my basement it is the first tool I reach for. The ability to drill pilot holes and then just flip the head and drive in a screw or nut is irreplaceable. The fact that it has the quick-release chucks makes switching out bits quick and easy. IMHO, this tool is a winner. I give it a well done and two thumbs up!!
Price: $129.99 Where to buy: Worx website and Amazon Source: The sample for this review was provided by Worx.
Your email address will not be published. Required fields are marked *
Don't subscribeAllReplies to my comments Notify me of followup comments via e-mail. You can also subscribe without commenting.
This site is intended for informational and entertainment purposes only. The contents are the views and opinions of the author(s) and/or associates. All products and trademarks are the property of their respective owners. Reproduction in whole or in part, in any form or medium, without express written permission of The Gadgeteer, is prohibited. All content and graphical elements are Copyright © 1997 - 2022 Julie Strietelmeier and The Gadgeteer. All rights reserved.