Professional Tool Reviews for Pros
Whether you’re getting ready to enter a career as a mason or just have some DIY work to do around the house, knowing what rotary hammer bits to reach for makes all the difference in the outcome. It’s more than know what diameter and depth you need to drill—it’s about the makeup and design of the bit itself.
If you’re just setting a few Tapcons, you don’t need a rotary hammer. A cordless hammer drill and one of Bosch’s MultiPurpose bits make quick work of the hole-drilling process.
When you step up to more or larger holes, that’s where a rotary hammer comes into play. Modern rotary hammers have either an SDS-Plus or an SDS-Max chuck. SDS stands for “Slotted Drive System.”
The connection types are different and not interchangeable, so be sure to buy the bit to match your hammer. In general, you move from SDS-Plus to SDS-Max as the hole diameter you need to drill increases, though there is plenty of overlap in the middle diameters.
Most rotary hammer bits use a two-cutter design. Once you mill out the steel, a carbide chip goes on the end to create the two cutting edges using a welding or braising process for the connection. When you hear the term “embedded carbide,” it refers to that type of attachment process.
There’s also a four-cutter design. One way to make it is to place two smaller cutters on either side of the original carbide chip, making three total pieces. Another is to start with a single cross-shaped piece and embed it. You see the single piece form in newer designs.
Confused about carbide? Learn more here!
Two-cutter bits are excellent for drilling fast in concrete. However, they are not designed to cut through rebar and often bind up when they hit it.
The four-cutter design lasts longer and is able to cut through rebar where a two-cutter head binds up. Kickback control helps prevent injury if your rotary hammer has it, but you can still damage either bit style on rebar.
When you’re drilling in reinforced concrete, standard procedure has you swap to a rebar cutting bit to get through it, then back to a drilling bit to finish the hole.
There’s now a third option as well. Bits like Bosch’s Speed Xtreme use a full carbide head instead of just carbide cutters. It creates a stronger bond and lasts even longer than the four cutter head. Most importantly, it chews through rebar without taking the damage that other bits do.
We’re also seeing some manufacturers go to six or more cutting edges on larger bits. According to the team at Bosch, it’s more difficult to pull off correctly compared to a solid carbide head. There’s also the issue of diminishing returns—the performance benefits of these bits aren’t as great compared to the increase in cost.
Anytime you’re working in concrete, pay attention to OSHA’s silica dust regulations. Hollow core bits like Bosch’s Speed Clean make the process faster by collecting dust as you create it. Universal shrouds and onboard dust extractors are other options to contain it without the need for excess PPE.
On the clock, Kenny dives deep to discover the practical limits and comparative differences for all kinds of tools. Off the clock, his faith and love for his family are his top priorities, and you'll typically find him in the kitchen, on his bike (he's an Ironman), or taking folks out for a day of fishing on Tampa Bay.
Shades of 2007 Return as Fed Warns of New Housing Bubble It’s been an up and down couple of years for construction. Up thanks to the huge demand for housing, but down because of the challenge to find labor, supply shortages, and material price volatility. With housing costs on the rise, the Fed is now […]
If you’re a value shopper like me, you’re looking for the most bang for your buck. So you open your tabs and (if you’re really obsessed) your spreadsheets and start comparing. However, everything isn’t always as it seems. 18V isn’t any different than 20V max. There’s no good comparison between in-lbs of torque and unit […]
So you have a piece of metal and it needs a few holes in it. No big deal you think. You grab your drill and a bit. Five minutes later when you have barely made a dent in the metal, you decide it is time to go to the hardware store for a new drill […]
Cordless has come a long way since the early days of lithium-ion power. Where circular saws were initially struggling for adequate performance (and even a 7 1/4-inch blade), they now exceed the performance of 15-amp corded models. We decided to test the waters and pulled our expert team together to discover who makes the best […]
As an Amazon Associate, we may earn income when you click on an Amazon link. Thanks for helping us do what we love.
See our Privacy Policy and Terms & Conditions.
Pro Tool Reviews is a successful online publication that has been providing tool reviews and industry news since 2008. In today’s world of Internet news and online content, we found that more and more professionals researched a large majority of their major power tool purchases online. That piqued our interest.
There’s one key thing to note about Pro Tool Reviews: We’re all about the professional tool user and tradesman!
Copyright ©2008-2022 Pro Tool Reviews, LLC. All rights reserved.
Professional Tool Reviews for Pros
This website uses anonymous cookies to provide you with the best browsing experience.
This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognizing you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful. Feel free to read our full privacy policy.
Strictly Necessary Cookie should be enabled at all times so that we can save your preferences for cookie settings.
If you disable this cookie, we will not be able to save your preferences. This means that every time you visit this website you will need to enable or disable cookies again.
This website uses the following additional cookies:
Gleam.io - This lets us offer giveaways that collect anonymous user information such as the number of visitors to the site. No personal information is collected until or unless it is voluntarily submitted for purposes of manually entering a giveaway.
Please enable Strictly Necessary Cookies first so that we can save your preferences!